These manufacturer videos walk through the Aloha Screens installation from start to finish, in the same order as the written installation manual. They're a great way to see what goes into a proper install. Want it done for you? Aloha Spirits and Screens handles the measure and installation. Request a free quote.
1. Will It Work In Your Garage? Measurements and Clearances
Tips and Tricks:
- Make sure to measure the backside of your garage door.
2. Tools Needed For Proper Assembly and Installation
Tips and Tricks:
- Make sure you are using a brand new razor blade when cutting screen.
3. Opening The Box
Tips and Tricks:
- Inspect all packages for damage at delivery. Any damage must be noted on the shipper's receipt before the driver leaves.
- NEVER slice into any of the boxes with a razor knife.
4. Organization And Setup At The Jobsite
Tips and Tricks:
- Take the time to get organized. It will be worth it and will help speed up your installation.
5. Garage Door Adjustments: Opener, Draw Bar And Back Hang
Tips and Tricks:
- Be mindful that repeated opening and closing of the garage door can overheat the opener.
- No garage door opener? You can hold the door back for the required clearance with a 3" regular door hinge on a 3/4" piece of plywood measuring 3" x 7" (shown in the video).
6. Frame Assembly
Tips and Tricks:
- Use only a hand screwdriver when attaching magnet catches, and DO NOT OVERTIGHTEN.
7. Screening: Proper Spline Insertion
8. Leveling The Garage Door Screen
Tips and Tricks:
- Backer rod or pipe insulation can be used to level the frame. It can also add height to the frame for oversized openings.
9. Track Assembly Installation
Tips and Tricks:
- Tracks should NOT touch the floor.
- Tighten the track fasteners last. Start from the back and work forward, making sure the tracks line up and fit in the tight-radius corners so the rollers move smoothly from horizontal to vertical.
10. Assembling The Springs & Counterbalance System
Tips and Tricks:
- ALWAYS have the safety cable in place.
- The spring chart in the installation manual is a starting point. More pretension makes the screen easier to raise but harder to pull down.
11. Retractable Screen Door Installation
Tips and Tricks:
- The retractable door comes ready to install on the right-hand side of the opening (outside looking in).
- Center the retractable's handles on the pull bar and tighten them. DO NOT OVERTIGHTEN.
- Only use a dry silicone spray when lubricating the track of the retractable door.
12. Safety Photo Eye Installation
13. Final Checks And Verification
14. Proper Operation And Storage
Tips and Tricks:
- When retracting the Aloha screen, always store it with the retractable center door in the retracted position.
15. Lubrication And Preventative Maintenance
Tips and Tricks:
- Never use WD-40 as a lubricant. Only use a dry silicone spray lubricant.